Bohang Advantage: The A10VO is the world's most used pump, but its longevity depends on the load-sensing controller's accuracy. We use imported premium seal kits and standardized SOPs to ensure our DFR/DR controllers provide the same rapid response and energy savings as the original Series 31/32/52.
1. Short Response Times: Rapid stroke adjustment ensures dynamic system performance.
2. Low Noise Emission: Advanced housing design reduces decibel levels in industrial environments.
3. Through-Drive Capability: Easily mount additional pumps to a single drive shaft.
FAQ
Q: Can your A10VO series operate with high-speed diesel engines?
A: Yes. Our A10VO is designed for versatility. However, since it is a swashplate design without an impeller, it relies on atmospheric pressure for suction. For high-speed engine applications, we recommend ensuring the suction line is short and wide to prevent cavitation.
Q: How do I adjust the Pressure Cut-off (DR) and Load Sensing (DFR) settings?
A: Each pump features two adjustment screws on the controller. The larger screw adjusts the maximum pressure cut-off (DR), while the smaller one adjusts the differential pressure for load sensing. Our units are factory-set to standard Rexroth specs, but you can fine-tune them on-site to optimize system response.
Q: Is it possible to mount a gear pump to the back of the A10VO?
A: Absolutely. We offer "Through-Drive" options (e.g., K01, K02, K04). You can easily tandem a second A10VO or a pilot gear pump using our standard SAE-A or SAE-B rear flange adapters.
Our Strategic Advantages
1. Decades of Specialized Expertise (Since 2008)
The Message: We aren't just a manufacturer; we are hydraulic pioneers. With nearly 20 years of dedicated focus on the Rexroth technical system, Foshan Bohang understands every internal tolerance and metallurgical requirement of axial piston units.
2. Premium Imported Raw Materials
The Message: Quality begins with the source. To match Rexroth’s durability, we exclusively use high-grade imported raw materials. From specialized alloy steels for cylinders and pistons to premium NBR/FKM (Viton) seal kits, our material selection ensures our products thrive in extreme high-pressure and high-temperature environments.
3. Standardized "Rexroth-Level" Manufacturing Process
The Message: We don't take shortcuts. Our production lines follow the exact standard operating procedures (SOP) and processing times as Rexroth. Each component undergoes precise heat treatment, nitrogenation, and grinding to ensure that our replacement units are 100% interchangeable and functionally identical to the original.
4. 100% Engineer-Verified Performance Testing
The Message: "Zero-Defect" is our goal. Before leaving the factory, every single unit is personally tested by our senior engineers on high-precision digital test benches. We verify volumetric efficiency, mechanical noise, and leakage rates under full load to guarantee "Plug-and-Play" reliability for your machinery.
5. The Best "Drop-in" Alternative in China
The Message: Foshan Bohang is committed to being the top-tier Chinese alternative to Rexroth. We bridge the gap between high-priced originals and low-quality aftermarket parts. Our mission is to provide global customers with the most cost-effective, high-performance axial piston pumps and motors that match the original installation dimensions perfectly.
